Allen-Bradley SLC System

RockWell Allen-Bradley 1747 SLC™ 500 PLC is a chassis-based, modular family of controllers and I/O. With multiple processor choices, numerous power supply options and extensive I/O capacity, the SLC 500 family provides a powerful solution for mid-range stand-alone or distributed industrial control. As one of the first full-featured small controllers on the market, it remains the gold standard in logic controllers more than a decade after its introduction.

Features

• Up to 64 K words of configurable data and program memory
• Control up to 4096 input and 4096 output signals
• Configure up to three local chassis, with 30 local I/O or communication modules maximum
• Monitor and control remotely located I/O across ControlNet™, DeviceNet™, and Universal Remote I/O links (requires I/O scanner module)
• Built-in ports for EtherNet/IP™, DH+, DH-485, or RS-232 communication
• Available communication modules provide additional communication options
• Specialty modules support simple motion control applications
• Continued support and on-going engineering investment for a large installed base

Products

• 1747 SLC™ 500 Controllers
• 1746 SLC I/O
• 1746 Chassis
• 1747 Communication Interface Modules
• 1746 Power Supplies

Certifications

• UL, C-UL, CE, C-Tick

Certifications apply when product is marked. See our Product Certification site for Declarations of Conformity, certificates and other certification details.

Chassis

Allen-Bradley SLC PLC System 1746 SLC™ 500 Power Supplies provide power to installed controllers or adapters and I/O modules in an SLC chassis. Seven power supplies support a range of AC and DC input voltages.

Allen-Bradley SLC™ 500 system requires a chassis to contain the various modules. Chassis are available in sizes of 4, 7, 10, and 13 module slots. The backplane provides a communication path between the I/O modules and either the controller or the I/O adapter module.

Communication Interfaces

Allen-Bradley SLC PLC System 1747 SLC™ 500 Communication Interface Modules let you add another communication port to the SLC 500 controller. This adds network capability beyond the available on-board ports. Some modules provide an interface between a port on the controller and another communication link with a different protocol. Other modules communicate with the SLC processor over the system backplane.

Controllers

Allen-Bradley SLC PLC System 1747 SLC™ 500 controllers provide a range of choices in memory, I/O capacity, instruction set,

and communication ports to let you tailor a control system to your exact application requirements. Our controllers have a strong reliability history covering hundreds of thousands of installations in a broad range of applications.SLC 500 Controller Comparison:

Allen-Bradley SLC PLC System 1747, Please contact our sales personnel.

SLC 500 I/O Modules

Allen-Bradley SLC PLC System 1746 SLC™ I/O provides a full range of digital, analog, and specialty I/O for a wide variety of applications. You can use the I/O modules in a local I/O chassis of an SLC 500 controller. Or, use an I/O communication adapter module to place I/O in a chassis at a location remote from the controller.

1746 SLC Digital I/O Modules,1746 SLC Analog I/O Modules,1746 SLC Specialty I/O Modules,1746 SLC Communication Interfaces

Power Supplies

Bulletin 1746 SLC™ 500 power supplies provide power to

installed controllers or adapters and I/O modules in an SLC chassis. Seven power supplies support a range of AC and DC input voltages.

• Withstands brief power losses without affecting the operation of the system
• Typical hold-up time of 20 milliseconds to 3 seconds
• Connects directly to the chassis without an additional cable
• Four DC options support 12/24V DC, 24V DC, 48V DC and 125V DC input voltages
• Three AC options support 120/240V AC input voltages

SLC System Software

Use RSLogix 500 programming software software to program your SLC™ 500 system.

The controller and modules you select, along with your network configuration, determine which additional software packages you need to configure and program your system. Additional required softwar