24小时客服热线
4000-511718
地址：深圳市太子路18号海景广场10A
电话：4000-511718 传真：0755-26850713
邮件：sales@greatsystem.cn
网站：http://www.greatsystem.cn
Standard Accessories All models are shipped with drain/vent valves, and one instruction manual per shipment. Tagging The transmitter will be tagged, at no charge, in accordance with customer requirements. All tags are stainless steel. The standard tag is wired to the transmitter, however a permanently attached tag is available upon request. Tag character height is 0.125 in. (0.318 cm). Calibration Transmitters are factory calibrated to the customer’s specified range. If calibration is not specified, the transmitters are calibrated at maximum range. Calibration is performed at ambient temperature and pressure. Options The following sections describe a variety of available options for the 1151 Transmitter. These options permit greater application flexibility. Optional Manifolds Refer to Manifold Product Data Sheet (document number 00813-0100-4839). Optional Diaphragm and Sanitary Seals Refer to Product Data Sheet (document numbers 00813-0100-4016 or 00813-0201-4016) Mounting Brackets B1 Bracket for 2-in. Pipe Mounting • Bracket for mounting transmitter on 2-in. pipe • Constructed of carbon steel with carbon steel U-bolt • Coated with polyurethane paint B4 Bracket for 2-in. Pipe with 316 SST Bolts • Same bracket as Option Code B1 with 316 SST bolts B7 304 SST Bracket and 316 SST Bolts for 2-in. Pipe Mounting • Same bracket as Option Code B1 with all SST materials B2 Bracket for Panel Mounting • Bracket for mounting transmitter on panel or wall • Constructed of carbon steel with carbon steel bolts • Coated with polyurethane paint B5 Bracket for Panel with 316 SST Bolts • Same bracket as Option Code B2 with 316 SST bolts B3 Flat Bracket for 2-in. Pipe Mounting • Bracket for vertical mounting of transmitter on 2-in. pipe • Constructed of carbon steel with carbon steel U-bolt • Coated with polyurethane paint B6 Flat Bracket for 2-in. Pipe with 316 SST Bolts • Same bracket as Option Code B3 with 316 SST bolts B9 304 SST Flat Bracket and 316 SST Bolts for 2-in. Pipe Mounting • Same bracket as Option Code B3 with all 316 SST materials Bolts and Nuts for Flanges and Adapters Options permit bolts and nuts for flanges and adapters in the specified material. • L3 ANSI/ASTM A - 193-B7 • L4 Austenitic 316 SST • L5 ANSI/ASTM A193-B7M Meters Analog • Meters have 2-in. (50.8 mm) scale • Plug-in mounting configuration • Indication accuracy ±2% • Operating temperature limit: –40 to 150 °F (–40 to 65 °C) • Meters are enclosed in a housing certified by Factory Mutual as Explosion-Proof for Class I, Division 1, Groups B, C, and D; Class II, Division 1, Groups E, F, and G and Class III, Division 1 • For optional CSA explosion-proof approval, see certification Option Code E6 • M1 Linear Analog Meter, 0–100% Scale • M2 Square Root Analog Meter, 0–100% Flow Scale • M3 Special Scaling Analog Meter (Specify Range) • M6 Square Root Analog Meter, 0– 10√ Scale LCD • 4-digit display • Indication accuracy ±0.25% of calibrated span ±1 digit • Display resolution at ±0.5% of calibrated span ±1 digit • Operating temperature limit: –4 to 158 °F (–20 to 70 °C) • Plug-in mounting configuration • Meters are enclosed in a housing certified by FM as Explosion-Proof for Class I, Division 1, Groups B, C, and D; Class II, Division 1, Groups E, F, and G and Class III, Division 1 • For Optional CSA explosion-proof approval, see certification Option Code E6 • Reverse output not available with LCD Display • M4 Linear LCD Meter, 0 to 100% • M7 Special Scale LCD Display (Specify Range, Mode, and Engineering Units) • M8 Square Root LCD Display, 0 to 100% • M9 Square Root LCD Display, 0–10√ Scale
