24小时客服热线
4000-511718
地址：深圳市太子路18号海景广场10A
电话：4000-511718 传真：0755-26850713
邮件：sales@greatsystem.cn
网站：http://www.greatsystem.cn
mounted vertically, horizontally, or at any other angle of orientation.
Ordering Information Velomitor Piezo-velocity Sensor 330500-AXX-BXX A: Mounting Thread Adapter Option 0 0 No adapter 0 1 1/2 - 20 UNF 0 2 M8 x 1 0 3 1/4 - 28 UNF 0 4 1/4 - 20 UNC 0 5 Unavailable for 330500. For 1/4-18 NPT mounting, order 330525. 0 6 5/8 – 18 UNF 0 7 3/8 – 16 UNC 0 8 1/2 – 13 UNC B: Agency Approval Option 0 0 Not required 0 1 CSA/NRTL/C 0 2 SIRA/CENELEC 0 4 Multiple approvals
2-Conductor Twisted-Pair 22 AWG Cable with Female Plug and Terminal Lugs 9571-AXX A: Cable length Option in feet Order in increments of 1.0 ft (305 mm). Minimum: 2.0 ft (0.6 m) Maximum: 99 ft (30 m) Example: 0 9 = 9 ft 1 2 = 12 ft 2-Conductor Twisted-Pair 22 AWG Armored Cable with Female Plug and Terminal Lugs 84661-AXX A: Cable length Option in feet Order in increments of 1.0 ft (305 mm). Minimum: 3.0 ft (0.9 m) Maximum: 96 ft (29 m) Example: 0 9 = 9 ft 1 2 = 12 ft
2-Conductor Twisted-Pair 18 AWG Cable with Right Angle Plug and Terminal Lugs 89477-AXX A: Cable length Option in feet Order in increments of 1.0 ft (305 mm). Minimum: 2.0 ft (0.6 m) Maximum: 99 ft (30 m) Example: 0 9 = 9 ft 1 2 = 12 ft 2-Conductor Twisted-Pair 18 AWG Cable with Fluorosilicone-Booted Plug and Terminal Lugs 125065-AXX A: Cable length Option in feet Order in increments of 1.0 ft (305 mm). Minimum: 2.0 ft (0.6 m) Maximum: 99 ft (30 m) Example: 0 9 = 9 ft
Velocity Transducer Housing Assembly 21128-AXX-BXX A: Mounting Thread Option 0 1 Unthreaded 0 2 3/4 - 14 NPT 0 3 1/2 - 14 NPT 0 4 1/2 - 12 BSP B: Cable Exit Fitting Option 0 1 1/2 - 14 NPT plug 0 2 1/2 -14 NPT explosion-proof 0 3 1/2 -14 NPT explosion-proof with cable gland seal Note: Applications that use the 21128 housing require cable part number 89477-AXX to connect the Velomitor sensor to a monitor.
Velocity Transducer Housing – CENELEC approved 107770-AXX-BXX This part is a 21128 Housing with a 330500 Velomitor Sensor pre-installed at the factory. This part is rated for CENELEC Zone 1, Group IIC hazardous area applications. A: Mounting Thread Option 0 1 Unthreaded 0 2 3/4 - 14 NPT 0 3 1/2 - 14 NPT 0 4 1/2 - 14 BSP B: Cable Exit Fitting Option 0 1 1/2 - 14 NPT plug 0 2 1/2 - 14 NPT explosion-proof 0 3 1/2 - 14 NPT explosion-proof with cable gland seal
